Molecular Trap
Molecular Traps™ with highly activated molecular sieve packets designed to provide and maintain very low water levels in solvents and solutions.
Cap B - 16% Melm/THF
Used to 'cap' unreacted OH groups during oligo synthesis cycle, to prevent unwanted side reactions.
Empty MerMade Column with Lower Frit
Empty MerMade Column, with lower fitted frit, FR-1503, included. Top frit (FR-1502C) sold separately.
Cap A - 20% NMI in Acetonitrile
Used to 'cap' unreacted OH groups during oligo synthesis cycle, to prevent unwanted side reactions.
Cap B - 40% Acetic Anhydride in Acetonitrile
Used to 'cap' unreacted OH groups during oligo synthesis cycle, to prevent unwanted side reactions.
Acetonitrile - OmniSolv - HPLC Grade w/ UV Cure- (10 ppm H20)
Used as universal diluent for phosphoramidites, and as wash solution between oligo synthesis cycle steps.
Cap A - THF/Pyridine/Acetic Anhydride (8:1:1)
Used to 'cap' unreacted OH groups during oligo synthesis cycle, to prevent unwanted side reactions.
Deblock - 3% Trichloro Acetic Acid in Dichloromethane
CAS No.:76-03-9 / 75-09-2
Used to ‘deblock’ or ‘detritylate’ to release the reactive OH group during the oligo synthesis cycle.
Oxidizer - 0.1M Iodine in THF/Pyridine/H2O (78:20:2)
CAS No.:7553-56-2 / 616-47-7
Used to oxidise the unstable trivalent phosphite triester linkage to the stable pentavalent phosphotriester during the oligo synthesis cycle.
Activator 0.5M ETT/MeCN
CAS No.:89797-68-2 / 75-05-8
A tetrazole-like product used in the activation step of the oligo synthesis cycle.
FTN 1/4 OD Comp Ferrule Set, 316SS
Stainless steel ferrules for 1/4" compression fitting. Sold in a stick of 10 pieces. Includes top and bottom piece.
Vacuum Pump, 1 Bar G, 20L/min, Single Head, 115V AC
115V 60Hz, KNF single head pump.
Column Chuck for MerMade 4 Synthesizer
Column holder for synthesis columns, MerMade 4 only.
Pressure Gauge, 0 - 15 psi, 1/4" NTP
Pressure Gauge for Reagents
Valve, Check, Oil, 1/4 FNPT, 125 PSI, Black PP
Polypropylene, spring-loaded piston check valve.
MM12-Cart
Cart for MerMade 4, 6, and 12 (42"L x 24" D x 36"H)
GL45 Bottle Cap 1/8 X 1/4 Web Assembly
Bottle cap for GL45 large mouth bottles, with O-ring, one 1/8" tube and one 1/4" tube and fittings.
FTN 1/4 OD X 1/8 ID Tube Insert, 316SS
Stainless steel insert for 1/8" ID tubing to be used with compression fittings.
Tube, 3/16 ID, 1/4 OD, PTFE, Natural, 130 PSI
1/4" OD x 3/16" ID, PTFE tubing. Priced per foot.
Prox, Solid State, Slot Mount, 10-30V DC Input for 192X
Limit sensor for MerMade 192X, 192R, NPN, normally closed.
Added to basket