dA (Pac) CE-Phosphoramidite
dA (Pac) CE-Phosphoramidite
dA (Pac) CE-Phosphoramidite, 1 g, ABI (60 mL / 20 mm Septum)
CAS No.:110543-74-3
Key features
Show- Stringent QC includes testing for synthesis coupling efficiency
- Available pre-packaged for common synthesizers
Usually shipped in 3-5 days, Packed To Order
Product information
In oligonucleotide synthesis, the classic heterocyclic bases are dA, dC, dG, and dT.
UltraMILD deprotection
The classic heterocyclic base protection groups (Bz-dA, Bz- dC and iBu-dG) are routinely removed using ammonium hydroxide solution with heating. Unfortunately, many modifiers and labels used in oligonucleotide synthesis will not withstand prolonged exposure to such strongly alkaline conditions.
so takes place at room temperature if left for 120 minutes.AMA deprotection is not recommended for use in the presence of sensitive labels such as cyanine or rhodamine (TAMRA) dyes, or where there are Bz-protected C nucleosides as this will result in transamidation with methylamine. dmf-dG works particularly well with tbutylamine/methanol/water (1:1:2) as used for rhodamine containing modifiers (e.g. TAMRA).
Applicable Products
LK2059 | Pac-dA-CE Phosphoramidite |
LK2060 | iPr-Pac-dG-CE Phosphoramidite |
LK2290 | Pac-dA-SynBase™ CPG 1000/110 |
LK2292 | iPr-Pac-dG-SynBase™ CPG 1000/110 |
LK4210 | Cap Mix A: THF/pyridine/Pac-anhydride (85:10:5) |
General
Although Ac-dC-CE Phosphoramidite (LK2034) can be deprotected under UltraMILD conditions this monomer is routinely used under standard and UltraFAST conditions. Customers should refer to the standard protocols for use of this product and the analogous CPG supports.
Physical & Dilution Data
Dilution volumes (in ml) are for 0.1M solutions in dry acetonitrile (LK4050). Adjust accordingly for other concentrations. For µmol pack sizes, products should be diluted as 100µmol/ml to achieve 0.1M, regardless of molecular weight.
Item |
Mol. Formula |
Mol. Wt. |
Unit Wt. |
250mg |
500mg |
1g |
LK2059 | C48H54N7O8P | 887.97 | 313.21 | 2.82 | 5.63 | 11.26 |
LK2060 | C51H60N7O9P | 946.05 | 329.21 | 2.64 | 5.29 | 10.57 |
LK2290 | - | - | 313.21 | - | - | - |
LK2292 | - | - | 329.21 | - | - | - |
Coupling
No changes are required from the standard synthesiser procedure. Likewise, supports are be treated as normal. If many dG residues are included in the oligonucleotide, we recommend the use of phenoxyacetic anhydride in Cap Mix A (LK4210). This removes the possibility of exchange of the iPr-Pac protecting group on the dG moiety with acetate from the standard acetic anhydride capping mix.
Deprotection & Purification
We no longer stock UltraMILD Deprotection solution (0.05M Potassium Carbonate in Methanol). This is because in our experience this reagent works best when freshly prepared just prior to use. To prepare 100ml of such a solution:
- To a suitable volumetric calibrated vessel, add 0.69g potassium carbonate (K2CO3).
- Add dry methanol to a volume of 100ml.
- Stir, protected from moisture, until dissolved leaving overnight if necessary.
Cleavage and deprotection can be carried out in 4-17h at room temperature with this solution (alternatively use AMA at room temperature for 2h; ultimately the overall protocol will be dependent on the requirements of the base-sensitive modifications being used). Cartridge purification can be incorporated into the deprotection protocol.
Typical Protocol
- Carry out the synthesis of the modified oligonucleotide.
- Open the synthesis column and transfer the support to a suitable reaction vial.
- Treat the support with 0.5ml of 0.05M potassium carbonate in anhydrous methanol for a minimum of 4h at room temperature. For oligos with a high dG content reaction overnight is recommended.
- Desalt with a G25 column.
Storage & Stability
Phosphoramidites and supports are stored refrigerated at 2 to 8°C. Phosphoramidite solutions should be used within 24h.
Do you need these to complete your set?
dA (Pac) CE-Phosphoramidite is usually bought with these items:
Access support
Need some support with placing an order, setting up an account, or finding the right protocol?
Contact us